精品国产自在现偷,久久免费看黄a级毛片,猫咪在线看香蕉吚人网连接,色戒汤唯未删减版的在线观看

Welcome [ Wuxi Beirun Blower Manufacturing Co., Ltd. ] official website!

Position:Home > L series Roots blower >

L series Roots blower

L series Roots blower (1)
The main parts of the material selection
Axis: # 45 or 40Cr, 35CrMo.
Synchronous gear: # 45 or 40Cr, 35CrMo.
Impeller, chassis, wall panels, couplings, bearing, side cover are selected HT20-40 gray cast iron.
Complete sets of supply
Import air purifier, exhaust muffler, shared chassis, loop valve, with remote transmitter pressure gauge, safety valve, check valve, according to user requirements, the factory to undertake the above sets of supply business, welcome users to negotiate.
This product is the most widely used conventional varieties, suitable for pressure to clean air, clean gas.
The biggest feature of this product is smooth operation, the use of safe, low noise, has long been well received by users.
Performance Table (1)
L series Roots blower (2)
Use
Our factory L series Roots blower transmission medium to clean air, clean gas, sulfur dioxide and other inert gas-based. But also on-demand production of other flammable, explosive, eclipse, toxic and special gases. And thus can be widely used in metallurgy, chemical, fertilizer, petrochemical, video, building materials, oil, mining, textile, gas stations, pneumatic conveying, sewage treatment and other industrial sectors.
L-type Roots blower is a national joint design (part of the company's proprietary) series Roots blower. Product parts versatility, high degree of standardization, reasonable structure, high efficiency, the use of safe and reliable. User selection, installation and maintenance and spare parts spare parts convenient.
L-type Roots blower series of wide coverage. Flow from 0.25-1000m³min, boost up to 98KPa.
Working principle
The two rotors in the body through the role of synchronous gear, the relative direction of the direction of rotation. In view of the impeller and the impeller between the impeller and the collective between the appropriate working gap, so that the suction chamber and exhaust chamber are isolated from each other, by means of the rotation of the impeller, the stroke of non-internal compression of the body of the gas from the intake chamber After pushing to the exhaust chamber, the exhaust gas reaches the blast.
Features
1, because the impeller in the body running without friction, no lubrication, so that the exclusion of gas without oil. It is chemical, food and other industries the ideal pneumatic transmission gas source.
2, Roots blower is the volume of rotary blower, use, with the pressure changes, the flow of change is very small, but the flow with the speed and change. Therefore, the choice of pressure is wide, the choice of flow can be achieved by selecting the speed.
3, Roots blower speed is higher, the rotor and the rotor, the gap between the rotor and the body is small, so less leakage, volume efficiency than the body high. I plant processing and assembly technology strength, to ensure that the gap is reasonable, uniform, both to achieve a higher volumetric efficiency, and will not make the body due to thermal expansion caused by friction.
4, Roots blower structure determines its mechanical friction loss is very small. Because only the bearings and gears have institutions, in the selection, the rotor, chassis and gear wheels have sufficient mechanical strength, safe operation, long service life is a major feature of the factory Roots blower products.
Type
Roots blower of the general type of vertical, horizontal two.
Horizontal - The two rotor centerlines of the blower are in the horizontal plane and the gas flows vertically (as shown in Figures 2a, 2b)
Vertical - the two rotor centerline of the blower in the vertical plane, the air flow for the horizontal flow (shown in Figure 3)
In order to facilitate the user to install and use, L1-L4 small fan with vertical and horizontal dual-use, L5 and L6 for the vertical, L7 to L11 large fan for the horizontal, horizontal structure of the inlet and outlet direction, such as from the strength, Into the next row as well. Our factory, vertical blower have been determined according to the direction of the exhaust to adjust the gap, such as users want to change into the exhaust direction, can be made in the purchase requirements, under the conditions allowed to change the strength.
Structure
Rotor: by the shaft, impeller, bearings, synchronous gear, coupling, sleeve and other components.
Impeller: the use of involute profile, the volume of high efficiency.
Bearing: near the coupling side as the positioning side of the choice of 3000 double row radial spherical roller bearings. Near the gear end as the free end of the use of 32000 single-row radial short cylindrical roller bearings to adapt to the thermal expansion of the rotor when the axial displacement.
Synchronous gears: consisting of ring gear and hubs for easy adjustment of impeller clearance.
Body: from the chassis and the left and right wall composition. Left and right wall panels and installed in the left and right wall panels of the bearing, seal, etc., can be common to each other.
Base: medium and small fans are equipped with a common base, a large fan only with the base, easy to debug debugging.
Lubrication: gear with immersion, the use of splash lubrication bearings. Lubrication effect is good, safe and reliable.
Transmission mode: mainly connected to the main coupling. If the performance specifications need, you can also use the V-belt transmission speed. Couplings use flexible coupling, can ease the impact and compensate for a small amount of axial deviation.
Product model description
Example: L84WD said No. 8 model (impeller diameter of 600mm, two rotor center distance 400mm), No. 4 impeller length) (1000mm), horizontal, coupling direct drive.
Roots blower performance parameters table












Clover blower
Features
1, forced air flow that changes, the flow change is small, the user can, as needed, in the rated boost range to adjust the outlet pressure.
2, the cylinder without lubrication, so the transmission medium does not contain oil.
3, three leaf fan air pulse is small, sealed, so low noise, leak less, high efficiency, smooth operation.
The main purpose
Widely used in sewage treatment, marine aquaculture, electricity, petroleum, chemical, metallurgy, cement, textile, food and other pneumatic conveying industry.
Requirements
1, the transport medium inlet temperature shall not be less than 40 ℃.
2, the medium particles content shall not exceed 100mg / m3, the maximum size of impurities shall not exceed half of the minimum gap of the impeller.
3, the use of booster shall not exceed the blower brand name calibration boost value.
Model description and specification performance
1, product model description
2, specifications and performance
Conveying medium: air and other neutral gases
Intake air temperature: 20 ℃
Intake flow: 1.66-66.8m3 / min
Intake pressure: 101.3kPa
Relative humidity: 50%
Fan boost: 9.8-98kPa
When the delivery medium or the use of conditions and the above standard changes, please specify when ordering.
欧美午夜精品一区二区蜜桃| 国产精品美女一区二区三区| 最新无码网站在线观看| 嫩草院一区二区乱码| 香蕉久久夜色精品国产| 久久久久精品久久久久影院蜜桃 | 亚洲av无码久久寂寞少妇| 国产精品夜色一区二区三区| 久久久96人妻无码精品蜜桃 | 国产97在线 | 免费| 八个少妇沟厕小便漂亮各种大屁股| 中文字幕丰满乱孑伦无码专区| 蜜臀av人妻久久无码精品麻豆| 美女露出奶头扒开尿口| 人人澡人人妻人人爽人人蜜桃| 欧洲高清视频在线观看| 欧美疯狂做受xxxx高潮小说| 亚洲色丰满少妇高潮18p| 无码AV大香线蕉伊人久久| 制服丝袜中文字幕在线| 国产又猛又黄又爽| 天天看片高清影视在线观看| 99久久国产露脸国语对白| 国产精品免费视频| 欧美日韩亚洲国产精品| 久久人妻少妇嫩草av无码专区 | 51精品国产人成在线观看| 久久av高潮av无码av| 国产免费av片在线观看| 久久久久亚洲AV无码麻豆| 久久久久国产精品无套专区| 亚洲中文字幕久久精品无码喷水| 人妻影音先锋啪啪av资源| 蜜臀久久av无码牛牛影视| 《与上司出轨的人妻》| 香蕉久久夜色精品国产| gogogo免费视频观看| 久久99国产精品久久| 国产老妇伦国产熟女老妇视频| 强伦姧人妻波多野洁衣| 亚洲 欧美 中文 日韩aⅴ|